Use and maintenance battery powered bikes points

Do not use electric bicycles zero start (ie, place start), especially in the uphill more weight and should be prohibited. When starting, you should use human riding, when it reaches a certain speed and then converted to electric driving, or direct use of electricity to help move traffic. This is because the starter motor must overcome the static friction, then the current is large, even up near the atropisomers current, the high current battery, the battery accelerated damage. Try to use when riding bike human-assisted or power-assisted approach, especially uphill, weight, wind speed or road bumpy ride is not usually must be human help. Thus, the longer the battery to  cargo electric bicycles avoid large current discharge, damage batteries, help to improve a charge to continue the mileage, extend battery life. Electric bikes suited to rocky or too steep (generally ≤ 8 °) on the road. In case of such a road, the driver should slow or get off the implementation. In this kind of power mobility scooter road travel, motors, controllers, batteries and other poor working conditions, will reduce the life and easily damaged. Avoid driving electric bicycle brakes and start frequently, while front brake or return to the governor should make full use of human riding in support of regional roads. Thus, a large current when the battery to avoid damage to the starter. Standard load electric bike is 75 kg, should try to avoid overloading. If the overload driving, you should use human riding, to help move the way the human. Cold weather use of electric bicycles, should be human-assisted or power-assisted driving; and should also pay attention to battery power and voltage indication, when cold weather in general, should be appropriate to reduce the depth of discharge of the battery, must undervoltage condition driving. This is because, when the weather is cold battery charge capacity and discharge capacity were decreased. Electric bikes are not afraid of rain and snow. However, when the water level involving electric wheel height can not exceed the lower edge of the bearing to prevent the motor from water damage. After the rain and snow riding, you should wipe clean, as soon as possible; If electrical parts flooding should be dried with a hair dryer. Avoid iron corrosion and leakage circuit, short circuit fault. Rain and snow riding, driving speed should be appropriately reduced, increased attention brakes braking distances, prevent skidding and turn around so as to avoid endangering personal safety. Electric bicycles should avoid prolonged sun exposure, should be stored in a cool place. Sunlight will accelerate the aging of paints, plastic parts, rubber parts and electronic components, reducing its service life and reliability. Electric bicycles should be stored in a cool, ventilated, dry, corrosive liquids and gases away from the place; when you want to store the vehicle upright, adequate tire pressure; non heavy load on the body; and batteries should be stored separately.