how to protect supply plating layer bike?

Plating layer is battery powered bicycles chrome plating, not only increase bicycle beautiful, but also to extend the service life, usually should pay attention to protect them.

① regular cleaning. Generally speaking, once a week should be clean, apply a soft cotton or cloth to wipe off the dust, along with some transformer oil or oil wipe, if the case of rain blisters, should be washed with water, dried, plus points oil.

② ride not too fast. Normally, the wheel will quickly gravel off the ground, forming a large circle on the vehicle impact, so that the damaged rim. Rims severe rust holes, mostly due to this reason.

③ plating layer can not be battery powered bicycles, hydrochloric substance in contact with salt, and it is not on the soot BBQ place.

④ plating layer if rust can be a little toothpaste gently wiped. Bicycle galvanized layer, such as ribs, etc. Do not wipe, because a layer of dark gray basic zinc carbonate formed on the surface, to protect the internal metal from corrosion.

Rational use of batteries

When the battery used in tandem, if resistance is inconsistent battery during charging and discharging of the battery terminal voltage will be inconsistent, which will ultimately result in the entire group of cells due to charge and premature failure. Therefore, the Electric Bikes, balancing the consistency of the battery pack has a considerable impact on battery life. For consumers, how to properly use, the battery will be balanced consistency have been affected, thus affecting the battery life. Based on research and practical use of the battery over the years, it advised consumers to use the following method reasonable use of the battery.
(1) electric Juji line speed: 20-25km / h.
(2) riding distance: 10-30km / day, equal to 70 percent less than the depth of discharge (every two months for a deep discharge).
(3) Charge frequency: once per day.
(4) load: single ride (can bring a child under the age of 10).
According to the above method, good quality electric tricycles in normal use can reach 3--4 years, or even five years, and the battery can be used for about a year and a half. The shallower depth of discharge the battery, the longer the battery cycle life, the longer the battery life cycle. Therefore, consumers generally considered one charge of first cycle is wrong, in order to make their own use of extended battery life, we must always make the battery in a fully charged state, under long term power loss, the battery's negative plate easily salinization, loss of battery capacity, affecting battery life.

Battery purchase points

AGM batteries have a low cost, the advantages of a large discharge current, but there is a narrow temperature range, the battery is easy to dehydration and thermal runaway defects; and GEL batteries are costly, but with stable performance, wide operating temperature range, resistance to over charging over-discharge, long life and other advantages.
As the Electric Tricycles batteries in most cases is a large current, deep discharge cycles, therefore, the electric bicycle battery is more suitable for use gel batteries. Resistant gel batteries discharge capacity and capacity was kept extremely strong electric avoid the impact on the battery discharge, and loss of water caused by the battery thermal runaway phenomenon.
Charging characteristics of lead-acid batteries of various brands are basically the same, but because the manufacturers of the battery material formulation, the electrolyte concentration and quality were different, the charging voltage also have some differences, therefore, strictly speaking, should be based on each battery manufacturing plant Specific requirements for determining battery charge voltage scheme, or likely to cause undue battery.
Electric Bicycles motor output power to match the battery's rated power, so in order to prolong battery life, the electric bicycle motor power to try to be less than the rated power of the battery to avoid battery long-term work at full load or overload conditions

Electric bicycle purchase common sense

1. Select the brand. Flyhorse Electric Bicycles attention to the selection of high visibility brand, quality and service are guaranteed.
2. Pick models. Different models, its safety and performance varied. Proposed purchase simple, lightweight.
3. See the appearance. Note Electric Bikes smooth surface, gloss, pay attention to welding, painting, plating quality.
4. Get the feeling. Trial ride and feel the start of the vehicle, acceleration, driving is stable, is comfortable to handle the vehicle, check the tightness of the brakes, handlebars flexibility, mobility wheels.
5, check procedures. Check production license, manual, certificate is valid, complete, check the vehicle with accessories are complete. Particular attention to whether the licensing approval for local models.
6. Look configuration. Relevant and important components such as the battery, motor, charger,

Battery powered mountain bikes various parts

Battery powered mountain bikes because of their rugged, rough, innovative appearance, colorful eye-catching colors, superior riding performance, soon to become the city's young people to pursue fashion. Its various parts are different from ordinary battery bicycles, with buffer, seismic performance good tires, solid and firm, the material stiffness of the frame, the handle fatigue and even on steep slopes can be fun to ride a transmission and so on, have made cross-country mountain bike more suited to climbing, hiking trips.

Fire safety

Always check the circuit Electric Bicycles docking point, to prevent contact with the contact point is not strong cause ignition, heat; avoid the aging, wear and tear caused by a short circuit, train electrical accident. Electric cars in normal use, failure to choose a professional service organization or person, do not disassemble electrical protection devices, electrical circuits and protection devices to ensure good and effective. Electric bicycle battery will run out when charging a combustible gas, so that the charge must not narrow, sealed environment, should be in the outdoors, or remove the battery charged separately. To select the appropriate line charging, line laying should be fixed installation, to install short-circuit and leakage protection devices.
EV must stay away from flammable materials must not charge for too long, long charging time, the charger overheating easily lead to fires, shall be charged in accordance with the instructions when charging, the charging time in principle, more than 10 hours . When charging, the charger should be placed in a relatively easy to heat the place; if battery electric bike inferior quality or prolonged use, the charger is easy to high temperatures, causing a fire, so when the charge can not be taken lightly nighttime sleep.
In the process of moving Electric Bikes started uphill pedal walker should avoid starting current is too large, mechanical overload of work for a long time, causing the motor coil, line, battery and governor overheating damage and even lead to disaster . To try to avoid the rain, water roads and prevent the motor from the water, while charging a short circuit fire.
In addition, the purchase of an electric car, lithium bottle should be preferred. Its large capacity, since less consumption, less pollution, followed by dry lead-acid batteries, sealing it, and not to be leaking, we must prevent the pollution caused by electrolyte leakage, corrosion and damage. Purchase of electric car must see the product manual and follow the manual operation, but also to choose the electric car, charger, motor models, specifications matching battery. [3]

Battery powered bike uses no power switch structure

Battery powered bike uses no power switch structure, human riding speeds greater than 6 km / h in order to rotate the governor power to the motor, when the wheel stops rotating automatically power, easy to use, energy saving. Battery powered bicycles generally use soft start to exercise, safe and comfortable, which can effectively improve the continued line mileage and battery. Is a relatively common sports, fitness and leisure products, both relax and exercise, has become the new darling of leisure.

The center of gravity of the world bicycle industry is moving

The center of gravity of the world trike bicycles industry is moving from the traditional means of tools of transportation to sports, mountain, leisure transformation, in the United States, Europe, Japan and other developed countries, Electric Mountain Bike is a relatively common sports, fitness, recreation and entertainment products. Bicycle huge demand all over the world every year. Since the characteristics of the industry and labor cost factors, China became the world's largest bicycle bike production base, vehicle manufacturers, parts manufacturers are the main base in China. With the improvement of people's income levels around the world, global demand will further expand the bike, as bike further structural upgrades will bring greater profit margins players in the industry, the development prospects of China's bicycle industry will also be more broad.